SKY100081 e3 AC Charger SkyRc Carica LIPO 2-3 S

Descrizione

SKY100081 e3 AC Charger SkyRc Carica LIPO 2-3 S

Caricabatterie completo di cavo alimentatore, per 2 e 3 celle lipo

Il caricabatterie SkyRC e3 AC Balance è progettato per batterie LiPo 2-3s. La sua semplicità e il suo costo contenuto lo rendono famoso non solo nel mondo RC, ma trova anche il suo segmento commerciale nel mercato del soft air.

Peso 103 g
Presa bilanciatore XH
Istruzioni Inglese
Max N. Celle Lixx 3
Dimensioni 88x57x35 mm
Corrente bilanciamento 200 mAh
Alimentazione 100-240V AC V
Tipo batteria Lipo
N. uscite 1
Corrente di carica 1A-2A A
Max carica per canale AC 2 A
Potenza di carica max 13W in AC W
Max carica per canale AC 13 W
Max Watt carica totale AC 13
Contenuto della confezione
• Caricabatterie 220V
• Cavi Alimentazione 220V

SKYRC e3 Charger is an economic, high quality 100-240V AC balance charger, designed for charging LiPo batteries from 2-3 cells in balance mode. The circuit power is 11W and max charge current can reach to 1.2A.

CHARGE PROCEDURES

SKYRC e3 comes with the built in power supply. You can connect the AC power cord to the AC socket (100-240V AC) directly.
Insert the AC power cord into the charger.

Insert the AC cord into a wall socket (100-240V). All LEDs will light green and flash red to indicate the charger is ready to charge.
Connect battery balance wire to balance port which is in front side of the charger, after 2 seconds, the charger detects the voltage of the battery and starts to charge.
The charger starts charging. The LEDs will glow constant red. If the battery pack is 2-cell, Cell 1 and Cell 2 LEDs will glow constant red; if the battery pack is 3-cell, Cell 1, Cell 2 and Cell 3 LEDs will glow constant red.
When a cell is completely charged, its corresponding LED will glow constant green. A 2-cell pack is fully charged when LEDs 1 and 2 are constant green. For 3-cell pack, all LEDs will glow constant green to indicate the pack is fully charged.
Unplug the battery from the charger and the charge status LED will stay green and flash red which indicates the charger is ready to charge another battery.

Specifications

AC Input:100-240VC,50-60Hz
Battery Type: LiPo
Cell Count: 2-3 cells
Charge Current: 1.2A Max
Cell Terminate Voltage: 4.2V ± 0.02V
Circuit Power: 11W ± 10%
Dimension: 88x57x35mm
Weight:103g
Data sheet